Scorpion ARMOUR Post Target Stand (10mm AR500)
Scorpion Post Target Stand (10mm AR500 Version)
Our Strongest Static Target Stand – Built to Handle Serious Impact and Maximise Stability
The Scorpion Post Target Stand – 10mm AR500 is the most robust, overbuilt option in the Scorpion line-up, purpose-built to handle repeated impacts from handguns, light rifles, and shotguns with minimal sway or movement. It’s ideal for shooters demanding maximum system stability, reduced side-to-side motion, and safer close-range engagements with common centrefire calibres. While the system is capable of withstanding higher power rifle hits, it truly shines when used for high-volume, high-frequency training with light to moderate calibres.
📌 Complete Kit – Includes 4 x Legs, 3-Piece Post (Lower, Upper & Slide-Lock Hanger), Zinc-Coated Fasteners
📌 10mm AR500 Post & Hanger – Raw Armour Steel Finish (Uncoated)
📌 3-Piece Modular Post – Compact Design for Easy Storage & Transport
📌 Clean Single-Bolt Target Mount – Less Visual Clutter, More Coverage
📌 Forward-Angled Post – Safer Fragment Deflection & Reduced Splash
📌 Compatible with Most Static Target Plates – Including Mild Steel, AR450 & AR500
📌 X-Base Style Legs – Powder-Coated Mild Steel with Excellent Strength
📌 Recoil Spring Mount – Built-In Coach Bolt Mounting System
📏 Dimensions & Setup Footprint
The base covers an approximate footprint of 800mm x 830mm when fully set up. The height to the centre of the target mounting bolt is approximately 1400mm, providing a stable and elevated shooting profile.
Why Use a Steel Post Instead of Timber?
The Scorpion’s 10mm AR500 steel post delivers exceptional strength, weight, and resistance to energy transfer, minimising target movement and improving shooter feedback. Compared to timber, the Scorpion system is stronger, more compact, and doesn’t suffer from post breakage or blowout under recoil. Its forward-angled spine directs splash safely downward and offers a narrower target profile, reducing visual distraction and the likelihood of post strikes.
📦 Despite being rated for full-power calibres like .30-06, this system is best used with light to moderate rifles for optimal control and recoil management. The modular frame packs down small for transport or storage, offering unrivalled strength-to-size performance.
Compatibility – Best for Plate Rack & IPSC Target Plates
✔ Single Bolt Mounts Preferred – Accepts most AR500, AR450, and Mild Steel target plates
✔ Optimised for Plate Rack Targets & IPSC Silhouettes – Best paired with centre-hole plates for clean visuals and improved performance
✔ Reduced Visual Distraction – Using single-hole targets helps conceal hanger hardware and prevents exposed, unused holes from distracting the shooter
✔ Improved Hanger Coverage – Single-hole mounting offers better protection of the hanger from splash and fragmentation
✔ Slide-Lock Hanger Design – Tool-less hanger attachment makes target changes fast and simple
🔄 Swap Targets in Seconds – Take advantage of an Extra Slide-Lock Hanger
Want to change target profiles without touching tools? We sell the Slide-Lock Hanger separately, so you can mount one to each of your target plates. This means you can keep each plate ready to go and swap between targets in seconds – just lift off the current plate from the post and slide the next one on.
📌 Additional Slide-Lock Hangers sold separately. Available in multiple steel grades to match each post version.
📌 Important: Hangers are only compatible with the matching post material and thickness.
6mm Post = 6mm Hanger
8mm Post = 8mm Hanger
10mm Post = 10mm Hanger
Calibre Ratings & Safe Use – 10mm AR500
🛑 For Handguns, Rifles (Light to Moderate)
✔ Handgun Calibres (.22LR to .45 ACP)
- Angled Targets (16° to 20°+): 10 metres+
✔ Light Rifles (.223 Rem, 5.56 NATO, .300 Blackout)
- Angled Targets: 30 metres+
✔ Full-Power Rifles (Up to .30-06 Springfield)(Requires Stakes Down Pegs)
- Angled Targets (16° to 20°+): 100 metres+
✔ Shotguns (.410, 12 Gauge – Birdshot & Buckshot)
- Angled Targets: 15 metres+
🛑 Velocity & Energy Ratings
✔ Max Energy: 2,100 ft-lbs
✔ Max Velocity: 2,850 fps at impact
✔ Min Velocity: 750 fps at impact
📌 Not rated for magnum rifle rounds
📌 Pegging down is strongly recommended with centrefire rifle use
📌 If the front legs begin to lift, you may need a heavier plate or greater distance to prevent system rocking or tumbling.
⚠️ Use Case Notes – Real-World Rifle Use
This 10mm AR500 Scorpion stand was not designed for regular heavy rifle shooting, even though the steel can technically take it. Full-power rifles can cause excessive rearward motion, system instability, and side-to-side swing.
✔ best suited and designed for light rifles and frequent close-range centrefire pistol shooting
✔ For consistent long-range use with .308/.30-06 or magnums, we recommend switching to a Gong Frame Kit or Delta Series Stand
📌 Compatible with Lower-Grade Targets
This system is fully compatible with 6mm Mild Steel and 6mm AR450 targets. However:
The system is only rated to the weakest component within the target zone.
- Mild Steel = .22LR only
- AR450 = Rimfire only
- AR500 = Rated for handgun, rifle, and shotgun (according to thickness)
Leg Durability & Strength
The Scorpion’s legs are made from 6mm powder-coated mild steel, offering excellent durability while keeping overall system weight manageable. The wide footprint helps prevent tipping, and legs are fully modular in case of damage.
Anchoring & Setup Tips
📌 Always anchor the system when using centrefire calibres – use V-Stakes or 300mm Nail Pegs (sold separately)
📌 Bolt the post together, insert the hanger with an appropriate target plate, and you're ready to shoot!
📌 Target plates sold separately – choose 10mm AR500 for best performance with this kit
Want a Lightweight Option?
If you’re mainly running rimfire or handgun calibres, check out our 6mm AR450 or 8mm AR500 Scorpion Kits. These versions reduce weight while still offering excellent performance for these lighter calibres.
📸 Photo Disclaimer: Images may show target plates, pegs, or accessories for demonstration. This listing is for the Scorpion Post Target Stand – 10mm AR500 Kit only. Target plates, pegs, and additional hangers sold separately. Some product images may show parts finished in powder coat for visual reference. Please note that many components in the Scorpion range — including posts, slide-lock hangers, and mounting hardware — are supplied raw and uncoated unless otherwise stated. The only common powder-coated components across the Scorpion line-up are the base legs (6mm mild steel). The 6mm Mild Steel Scorpion Post and its hanger are the only variants with black powder coating applied. All other versions (AR450 and AR500) are supplied raw and uncoated.
If desired, raw components can be finished or coated after delivery. Please read the product description carefully to confirm finish and material before purchasing.
🇦🇺 Proudly Made in Gippsland, Victoria, Australia