IPSC 22PC STACK-RACK + CASTOR WHEEL KIT – Full Kit
IPSC H-STAND 22PC STACK-RACK + CASTOR WHEEL KIT – Full Kit
A high-capacity storage and mobility solution for serious IPSC shooters. This full kit combines the 22PC Stack Rack (holds up to twenty-two H-Stands) with the Castor Wheel Kit add-on, allowing you to maximise vertical storage while still rolling your loaded rack effortlessly across flat indoor or covered areas.
Key Features:
✔ Maximum Storage Capacity – Holds up to 22 IPSC H-Stands vertically, reclaiming floor space and reducing clutter
✔ Effortless Deployment – Lift any H-Stand from the top of the stack for immediate use; no need to unload the rack to access individual stands
✔ Smooth Repositioning – Six PVC castors (four swivel, two fixed) let you roll your fully loaded rack across carpet, pavers or concrete with minimal effort (x2 wheels have lock brakes)
✔ Heavy-Duty Construction – Powder-coated mild steel rack and low-rolling-resistance PVC castors ensure long-term durability
✔ Stable & Balanced – Braced vertical supports maintain rigidity at 2 metres tall; fixed castors keep direction straight, while swivel castors (two with locking brakes) offer manoeuvrability
✔ Simple Assembly – Both rack and castor kit bolt together using standard hand tools (not included); full hardware pack supplied
Key Specifications
📌 22PC Stack Rack
• Material: Powder-coated mild steel (black finish)
• Capacity: Holds up to 22 IPSC H-Stands stacked vertically (timber post storage not included due to height)
• Vertical Supports: Four uprights (two additional uprights bolt onto the standard 11PC base) provide secure stacking
• Height: Approximately 2 metres (2000 mm) tall
• Base Plate: Pre-drilled holes; designed to fit the Castor Wheel Kit (Down-Range Trolley Kit not recommended due to tipping risk at this height)
• Weight (Rack Only): Approximately 30 kg (assembled)
• Finish: Premium black powder coat for superior corrosion resistance
• Assembly Hardware: Includes all bolts, nuts and washers required
📌 Castor Wheel Kit
• Castors Included:
• 4 × swivel castors (2 with integrated locking brakes)
• 2 × fixed castors
• Material: Low-rolling-resistance PVC wheels on zinc-plated steel brackets
• Load Capacity: Supports up to 300 kg when fully loaded (rack + 22 H-Stands)
• Compatibility: Fits IPSC H-Stand 11PC and 22PC Stack Racks (tested for flat indoor/covered surfaces only)
• Suitable Surfaces: Carpet, pavers, concrete – flat, smooth flooring only
• Hardware: All fastening hardware supplied for quick installation
(Note: The castors add approx. 100mm to the overall stand Hight)
Usage Notes
📌 Indoor/Flat-Surface Use Only
The Castor Wheel Kit is designed for moving loaded Stack Racks within flat storage areas. Do not use on dirt, gravel, uneven or outdoor terrain.
📌 Height & Tipping Caution
At approximately 2 metres tall, the 22PC Stack Rack’s centre of gravity is higher. Roll slowly and deliberately; avoid sharp turns or sudden stops. Always engage the two locking brakes on the swivel castors when stationary.
📌 Maintenance
Regularly inspect castor wheels for debris and check tyre rotation. Tighten any loose bolts or nuts. Wipe steel surfaces with damp cloth; apply light lubricant to castor swivel bearings as needed.
Package Includes
• 1 × 22PC Stack Rack (four uprights, base plate, horizontal supports)
• 6 × PVC Castor Wheels (4 swivel with brakes, 2 fixed)
• All bolts, nuts, washers and locking nuts required for rack and castor assembly
📌 For detailed assembly instructions, visit our Instruction Manuals page
📸 Photo Disclaimer – H-Stands, timber uprights and additional accessories shown are for reference only (sold separately)
🇦🇺 Proudly Made in Gippsland, Victoria, Australia