"Hit-Factor Bundle" – RIMFIRE Scorpion Post Target Stand + IPSC Standard Target (6mm AR450 Armour)
Hit-Factor Bundle – Scorpion Post Target Stand + IPSC Standard Target (6mm AR450)
Durable Training Kit for .22LR, .22 Magnum, .17 HMR & Low-Energy Handguns
-
Target Plate: IPSC Standard Profile – 570mm x 450mm (6mm AR450, raw finish)
-
Post System: 6mm AR450 Scorpion Post (raw finish)
-
Mounting: Single-bolt recoil spring mount with matching AR450 slide-lock hanger
-
Included Components:
-
3-piece modular post: lower, upper, and slide-lock hanger
-
4 x Scorpion legs (6mm mild steel, powder-coated)
-
Zinc-coated assembly hardware
-
-
Rated Use: Air/CO₂, .22LR, .22 Magnum, .17 HMR, and .410/.12GA birdshot
-
System Footprint: Approx. 800mm x 830mm base | Target height approx. 1400mm
Built for High-Volume Small Calibre Use
The Hit-Factor Bundle (6mm AR450) combines a full-size IPSC Standard target plate with our forward-leaning Scorpion Post Stand – both made from wear-resistant AR450 steel. This setup is ideal for rimfire and low-energy handgun shooters seeking longer life, better durability, and safer close-range training without the need for cardboard targets.
AR450 Scorpion Post – Angled Safety, Armour Durability
The fully steel post replaces timber with an angled, compact design that enhances shooter safety by directing fragmentation down and away. With fewer visual distractions and no exposed bolts in the strike zone, the Scorpion presents a clean profile for precise shot placement. The 3-piece design packs down easily, and the tool-free AR450 slide-lock hanger allows fast plate swaps between stages or sessions.
IPSC Standard Target – Realistic Profile, Greater Durability
Cut to full-size IPSC scoring shape (non-scoring border removed), this 6mm AR450 silhouette target is rated for high-velocity .22LR, .22 Magnum, and .17 HMR training. Also suitable for close-range practice with lower-powered handguns and shotgun birdshot. Designed for use with single-bolt mount systems, the plate integrates seamlessly into other compatible setups for clean, universal system expansion.
Calibre Ratings & Minimum Distances – 6mm AR450
-
Approved Use:
✔ Air/CO₂ Pistols & Rifles
✔ .22LR, .22 Magnum, .17 HMR
✔ Low-power handgun calibres (.22LR revolvers, pistols)
✔ Shotguns: .410 and 12GA (birdshot only) -
Minimum Safe Distances:
✔ Handgun: 10 metres+ (angled)
✔ Rifle: 25 metres+ (angled)
✔ Shotgun: 15 metres+ (angled), 20 metres+ (vertical) -
Velocity & Energy Range:
✔ Max Velocity: 2,650 fps
✔ Max Energy: 300 ft-lbs
✔ Min Velocity: 700 fps
⚠ Not rated for centrefire rifle or high-energy handgun calibres
⚠ Rounds below 500 fps may cause ricochet or bounce-back
Modular & Tool-Free Target Swaps
The included AR450 slide-lock hanger allows you to change target profiles in seconds. Keep additional plates pre-mounted to spare hangers (sold separately) and lift one off, drop the next one on – no bolts, no tools, no downtime.
📌 Only use hangers matched to the post material:
6mm Post = 6mm Hanger
8mm Post = 8mm Hanger
10mm Post = 10mm Hanger
Integrated & Compatible
This target plate is universally compatible across other Stag Point Industries systems, allowing clean integration into your existing setup. Whether you're using bolt, chain, or post-style mounts, the IPSC Standard plate fits easily with no fuss.
Anchoring, Setup & Assembly
-
Base footprint approx. 800mm x 830mm
-
Centre of target approx. 1400mm height
-
For improved recoil control, use V-Stakes or 300mm Nail Pegs (sold separately)
-
All fasteners included. Bolt the post together, drop in your hanger, and shoot
Durability Where It Counts
The Scorpion legs are made from 6mm powder-coated mild steel and sit outside the primary strike zone. While not armour-rated, they are strong, rigid, and replaceable if needed. The AR450 post and hanger provide substantial resistance to repeated small-calibre hits, ideal for clubs, training ranges, or high-volume recreational shooters.
Need to Step Up?
For centrefire use, consider our 8mm or 10mm AR500 Hit-Factor Bundles. These kits offer stronger recoil control, thicker target faces, and higher impact energy ratings – designed for larger calibres and longer lifespan under stress.
📸 Photo Disclaimer: Images may show optional targets, pegs, or accessories for demonstration purposes. This listing includes the Scorpion Post Stand and 6mm AR450 IPSC Standard Target only. Other components sold separately.
Some parts may appear powder-coated in reference images. Only the base legs are powder-coated. AR450 and AR500 posts and hangers are supplied raw/uncoated unless otherwise stated.
📖 Instructions & Safety
For full setup instructions, visit our Instruction Manuals page.
For safe use and distance ratings, see our Safety, Distance & Calibre Ratings page.
🇦🇺 Proudly Made in Gippsland, Victoria, Australia