"Hit-Factor" Bundle – RIMFIRE Scorpion Post Target Stand + Half-Size IPSC Silhouette Target (6mm AR450 Armour)
Hit-Factor Bundle – Scorpion Post Target Stand + Half-Size IPSC Silhouette Target (6mm AR450)
Durable Armour-Rated Kit for Rimfire, Low-Energy Handgun & Shotgun Training
-
Target Plate: Half-Size IPSC Silhouette – 375mm x 225mm (6mm AR450, raw finish)
-
Post System: 6mm AR450 Scorpion Post (raw finish)
-
Mounting: Single-bolt recoil spring mount with 6mm AR450 Slide-Lock Hanger
-
Included Components:
-
3-piece modular post: lower, upper, and slide-lock hanger
-
4 x Scorpion legs (6mm mild steel, powder-coated)
-
Zinc-coated assembly hardware
-
-
Rated Use: .22LR, .22 Magnum, .17 HMR, air rifles/pistols, birdshot
-
System Footprint: Approx. 800mm x 830mm base | Target height approx. 1400mm
Built to Outlast Mild Steel – Rimfire Ready, Armour Tough
The Hit-Factor Bundle (6mm AR450) combines the proven Scorpion modular stand with a half-size IPSC silhouette plate, both made from 6mm AR450 armour plate for extended lifespan and safer close-range use. Whether you’re running .22LR pistols, .22 Mag rifles, or .17 HMR bolt guns, this setup delivers reactive performance and real-world IPSC-style training – without the fragility of mild steel.
AR450 Scorpion Stand – Strong, Clean, and Safer
The narrow angled post eliminates timber breakage while minimising target sway and splatter risk. Its compact design bolts together fast, packs down small, and provides improved visual clarity with reduced post strikes. The raw-finish AR450 slide-lock hanger allows for tool-less target swaps and is built to match the post’s rating – ideal for heavier rimfire training.
Half-Size IPSC Target – Scaled Accuracy with Real Shape
Cut to the standard IPSC scoring zone (without the non-scoring border), this silhouette target challenges shooters with a reduced-size profile while maintaining authentic proportions.
Universally compatible across Stag Point Industries systems for seamless integration.
Reticle Size Reference – 375mm x 225mm
MOA at 100 yards: 14.1 MOA tall × 8.5 MOA wide
MOA at 500 yards: 2.82 MOA tall × 1.69 MOA wide
MIL at 100m: 3.75 MIL tall × 2.25 MIL wide
MIL at 500m: 0.75 MIL tall × 0.45 MIL wide
Calibre Ratings & Safe Use – 6mm AR450
-
Approved Use:
✔ Air/CO₂ (.177, .22)
✔ .22LR, .22 Magnum, .17 HMR
✔ Birdshot (.410, 12GA)
✔ Low-energy rimfire handguns -
Minimum Distances:
✔ Handgun (angled): 10 metres+
✔ Rifle (angled): 25 metres+
✔ Shotgun (angled): 15 metres+ -
Velocity & Energy Limits:
✔ Max Velocity: 2,650 fps
✔ Max Energy: 300 ft-lbs
✔ Min Velocity: 700 fps
⚠ Not rated for centrefire or magnum rifle use
⚠ Rounds under 500 fps may cause bounce-back
Modularity & Quick Target Swaps
Need to run different profiles? Add extra Slide-Lock Hangers (sold separately), pre-mount your targets, and swap in seconds.
📌 6mm Post = 6mm Hanger only
📌 Hanger compatibility must match post material
Anchor for Stability
-
Recommended: Use V-Stakes or 300mm Nail Pegs (sold separately)
-
Frame disassembles into compact parts for mobile range use
-
Raw-finish steel – repaint as needed for visibility and protection
Upgrade Ready
Shooting centrefire or heavier calibres? Check out:
-
8mm AR500 Hit-Factor Bundle – for .223, 5.56, .300 BLK
-
10mm AR500 Hit-Factor Bundle – for stronger recoil control and closer rifle engagement
📌 Each upgrade includes an armour-matched Slide-Lock Hanger
📌 All upgrades follow the same modular format
📸 Photo Disclaimer: Images may show powder-coated targets, mounts, or accessories for reference. This listing includes the 6mm AR450 Scorpion Post Stand and Half-Size IPSC Target only. Additional accessories sold separately.
Only the base legs are powder-coated. All AR450/AR500 components are supplied raw/uncoated.
📖 Instructions & Safety
Visit our Instruction Manuals and Safety, Distance & Calibre Ratings pages before use.
🇦🇺 Proudly Made in Gippsland, Victoria, Australia