22-DELTA KYL “Know Your Limits” .22LR Complete Target Rack Kit – Six 6mm Mild Steel Targets

Complete fold-up .22LR KYL target rack kit, including the stand, crossbar, spacers, assembly hardware and six descending-size 6mm mild steel targets.

The 22-DELTA KYL .22LR Complete Target Rack Kit includes everything needed to assemble your rack with a full set of six targets.

KYL stands for “Know Your Limits”. With targets descending from 2 inches down to just ¼ inch, this setup challenges your accuracy, consistency and judgement. Start with the largest target and work your way towards the smallest as the challenge increases.

Standing approximately 550mm high, the portable, fold-up rack provides improved target visibility over grass and uneven ground while packing down easily for transport.

The frame is manufactured from 6mm mild steel and powder-coated black. The included 16mm × 860mm raw bright mild steel tubing crossbar and seven 19mm × 100mm tubing spacers accommodate all six supplied targets.

The spacers maintain separation between the targets and limit sideways movement while allowing them to spin freely.

This is the complete 6mm Mild Steel kit—all six targets are included.

Key Features

✔ Complete Kit with Six Targets – Includes the rack stand, crossbar, seven spacers, assembly hardware and one target in each listed size.
✔ KYL “Know Your Limits” Challenge – Progress from the largest target to the smallest to test your rimfire accuracy.
✔ Six Descending Target Sizes – Includes 2", 1½", 1", ¾", ½" and ¼" targets.
✔ 6mm Mild Steel Targets – All six supplied targets are manufactured from 6mm mild steel for .22LR use only.
✔ Free-Spinning Target Setup – Spacers maintain target separation and limit sideways movement while allowing targets to spin freely.
✔ Taller Stand Height – Approximately 550mm overall height for improved clearance and visibility over grass and uneven ground.
✔ Fold-Up Design – Packs down for convenient storage and transport.
✔ Wide-Stance Frame – Includes stake-down holes for optional extra anchoring.
✔ Replacement Parts Available – Replacement targets, crossbars, spacers and spare parts are sold separately.

Included Target Sizes

One of each size, all manufactured from 6mm mild steel:

Arrange the targets from largest to smallest for a descending KYL challenge.

Specifications

• System Rating: .22LR only

• Target Style: KYL / Know Your Limits

• Targets Included: Six – one of each listed size

• Target Material: 6mm mild steel

• Target Sizes: 2", 1½", 1", ¾", ½" and ¼"

• Stand Height: Approximately 550mm

• Frame Material: 6mm mild steel

• Frame Finish: Powder-coated black

• Crossbar: 16mm × 860mm long raw bright mild steel tubing

• Spacers: Seven × 19mm × 100mm long raw bright mild steel tubing

• Ground Anchor Provision: Stake/peg holes at the base for optional anchoring

• Pack-Down: Folding frame for transport and storage

What Is a KYL Target Rack?

KYL means “Know Your Limits”. A row of progressively smaller targets creates an increasing accuracy challenge as you move through the rack.

Start on the 2" target, then work down through the sizes towards the ¼" target. Use the rack for a personal accuracy challenge or friendly competition, adjusting your shooting distance to suit your ability while following the required minimum safe distances.

.22LR Only – Safety & Use

This complete kit, including all six 6mm mild steel targets, is rated for .22LR use only.

This is a vertical hanging target system. Refer to our Safety, Distance & Calibre Ratings page for the minimum safe shooting distance and all use requirements before shooting.

Fitting alternative targets does not increase the calibre rating of the rack.

The complete system is rated to its weakest component.

Crossbar & Replacement Parts

The crossbar and spacers are supplied in raw bright mild steel tubing, without powder coating.

The crossbar may require replacement over time due to wear or projectile strikes. Replacement targets, crossbars, spacers and spare parts are available separately.

What’s Included

• 1 × 22-DELTA .22LR Target Rack Stand – Powder-coated black

• 1 × 16mm × 860mm Raw Bright Mild Steel Tubing Crossbar

• 7 × 19mm × 100mm Raw Bright Mild Steel Tubing Spacers

• 1 × 2" 6mm Mild Steel Target

• 1 × 1½" 6mm Mild Steel Target

• 1 × 1" 6mm Mild Steel Target

• 1 × ¾" 6mm Mild Steel Target

• 1 × ½" 6mm Mild Steel Target

• 1 × ¼" 6mm Mild Steel Target

• All required assembly hardware

What’s Not Included

• Ground stakes or pegs

Photo Disclaimer: Photos may show additional accessories for reference only. This listing includes the rack stand, crossbar, seven spacers, required assembly hardware and six 6mm mild steel targets—one of each listed size.